You may not think much is wrong when backing out of a driveway, but a malfunctioning rearview display in your Nissan can turn routine reversing into a safety hazard. “Nissan Backup Camera Recall by Year: 2018 to 2024 Model Overview” will help you understand whether your vehicle might be affected. From blurry or distorted images to blank screens when you shift into reverse, the backup camera defect has triggered a series of recalls across multiple Nissan and Infiniti models. These recalls are tied to wiring harness movement, software issues, or defects in the rear-view camera that violate Federal Motor Vehicle Safety Standard No. 111 “Rear Visibility.”
This article walks you through which model years—between 2018 and 2024—have been officially included in these recalls, outlines the specific symptoms owners have reported, and provides step-by-step guidance on how to verify if your car is listed. Whether you own a Leaf, Altima, Rogue, or another model, by the end you’ll know if your vehicle is on the recall list and what to do next for safety and compliance.
1. 2018 Models
In 2018, Nissan issued one of its largest safety recalls for backup cameras, affecting many models that year due to a defect where rearview camera displays failed to reset to default settings after use, potentially creating dangerous blind spots. According to reports, this recall impacted more than a million vehicles across multiple Nissan and Infiniti lines. Models such as the 2018 Altima, Sentra, Maxima, Leaf, Rogue, NV200, Pathfinder, and others were included.
Owners noticed symptoms ranging from retained, modified camera angles that didn’t return to the factory setting when shifting into reverse, to entirely blank displays or distorted images. Nissan’s official position was that such conditions likely violate FMVSS 111 (“Rear Visibility”), which mandates a clear and standardized rearview display for safety.
For anyone driving a 2018 Nissan, checking if your vehicle is part of this recall is crucial. You can verify your car’s recall status by entering your Vehicle Identification Number (VIN) on Nissan’s recall lookup page or via the NHTSA website. If your 2018 model is among those affected, Nissan has committed to remedying the display software at no charge to the owner.
2. 2019 Models
By 2019, Nissan had expanded its backup camera recall significantly. The recall included numerous 2018‑2019 Nissan models when it was discovered that the backup camera display could retain non‑default settings or fail to return to correct positions after reversing, or in some cases, the image simply wouldn’t display at all. This defect violates FMVSS 111 standards, which require rear visibility to be clear and compliant.
Affected 2019 models included not just the Altima and Sentra sedans, but also front‑liners and SUVs such as the Rogue, Armada, Frontier, Leaf, Maxima, Murano, NV/NV200, Pathfinder, Versa (Note and Sedan), Rogue Sport, and even some Infiniti models like the Q50, Q60, QX30, QX80 and others. Owners reported symptoms ranging from distorted, blurry, or delayed images on the backup display, to displays going completely blank when shifting into reverse. The harness behind the camera, subject to repeated vibration and movement, was a recurring culprit.
If you own a 2019 Nissan vehicle, verifying whether your VIN is included in the recall is essential. Nissan has provided a recall lookup tool on its website where you can enter your 17‑digit VIN. Dealers will perform the remedy free of charge, which typically involves repairing or replacing the rearview camera or the associated wiring harness.
3. 2020 Models
In 2020, Nissan issued a critical safety recall targeting several of its most popular models, following widespread reports of malfunctioning backup cameras. The issue affected the 2020 Nissan Altima and Sentra, and involved a faulty rearview camera wiring harness that could degrade over time due to continuous vibration, eventually leading to a distorted or completely blank camera display when reversing.
This recall, registered under campaign code R23C3 / NHTSA 23V-628, addressed a direct violation of Federal Motor Vehicle Safety Standard (FMVSS) No. 111, which mandates reliable rear visibility for all passenger vehicles. In affected vehicles, the backup camera image may fail to display properly, present warped or colored visuals, or lose calibration entirely. These visual inconsistencies significantly reduce driver awareness and increase the risk of collision while backing up.
Nissan’s official remedy involved inspecting and, if necessary, replacing the rearview camera or its associated wiring harness. This work is performed at no cost to the vehicle owner through any authorized Nissan dealership. Drivers of 2020 models are strongly encouraged to verify their vehicle’s recall status by entering the 17-digit VIN on the Nissan Recall Lookup Tool or the NHTSA website.
Failing to address this recall could leave drivers vulnerable to accidents and legal non-compliance, making it essential for owners of 2020 Nissan Altima or Sentra vehicles to act promptly and ensure their vehicle’s safety systems meet federal standards.
4. 2021 Models
For the 2021 model year, Nissan’s backup camera recall continued to affect popular sedans such as the Altima and Sentra, particularly in upper trims like the Altima Platinum. The core issue remained consistent with previous years — a deteriorating or loose wiring harness connected to the rearview camera, which caused unpredictable visual failures during reversing. As with prior recalls, this defect violated FMVSS No. 111 by compromising rear visibility, a federally mandated safety requirement.
Drivers of 2021 models reported backup camera images that were blurry, overly saturated, distorted, or, in some cases, missing altogether. The problem often occurred intermittently, making it difficult to detect until it became a consistent safety concern. Nissan acknowledged the defect in campaign code R23C3, which specifically included certain 2021 Altima and Sentra vehicles. In most cases, the fault was linked not to the camera itself, but to the wiring harness that connects it to the infotainment unit — a component vulnerable to wear due to vibration and thermal cycling inside the vehicle.
To address the issue, Nissan authorized dealerships to inspect the affected vehicles and, if necessary, replace the rearview camera and harness assembly. This service is provided free of charge under the recall. Owners are advised to check their recall status using Nissan’s official VIN lookup tool or the NHTSA’s recall search system. Taking timely action ensures that the rearview system performs safely and legally, reducing liability while restoring full functionality to one of the vehicle’s most essential driver-assist features.
5. 2022 Models
By 2022, Nissan had already spent several years addressing persistent rearview camera defects across its lineup. While many of the earlier recall campaigns focused on 2018 to 2021 vehicles, emerging complaints from 2022 model owners — particularly those driving the Altima and Sentra — signaled that the issue had not been fully resolved. Although Nissan did not immediately announce a new recall campaign specific to 2022 models, many vehicles from this year were indirectly affected due to carry-over hardware and software from prior model years.
In several customer reports submitted to NHTSA and independent safety databases, owners of 2022 Altima and Sentra vehicles noted intermittent loss of rearview image, screen flickering when shifting into reverse, or lag in camera activation. These are familiar symptoms, consistent with previous recall cases, and often stem from the same root causes: faulty wiring harnesses, poor electrical contact, or software instability in the infotainment system.
As of now, no formal recall has been issued specifically under a new campaign code for 2022 models. However, vehicles built early in the 2022 production cycle — especially those manufactured using components from affected 2020–2021 stock — may still be eligible for service under campaign R23C3, depending on their production date and VIN. That’s why it’s essential for 2022 Nissan owners experiencing camera issues to check their vehicle status through the official Nissan recall lookup tool or the NHTSA database.
Addressing these problems early, even in the absence of a new recall, can help prevent visibility hazards and ensure compliance with FMVSS No. 111. Nissan continues to monitor these cases closely, and any emerging patterns may trigger an expanded recall if enough data supports it.
6. 2023 Models
As Nissan introduced its 2023 model lineup, many consumers hoped that persistent backup camera issues had finally been resolved. With updated infotainment systems and minor platform refinements across models like the Altima, Sentra, and Rogue, it seemed reasonable to expect a clean slate in terms of rear visibility functionality. However, real-world data and early ownership reports suggest that the backup camera problem has not been entirely eliminated — though no formal recall has yet been issued specifically for 2023 models.
Some 2023 Nissan owners have reported sporadic camera failures resembling those seen in earlier recalls. Common symptoms include blank screens when shifting into reverse, delayed image loading, and intermittent distortion or flickering on the backup display. While these incidents are fewer in number compared to previous years, they raise concerns about whether the underlying hardware and software used in newer models have been adequately redesigned to eliminate the risk.
As of now, the National Highway Traffic Safety Administration (NHTSA) has not published a new recall campaign that includes 2023 model-year vehicles under the backup camera defect. However, vehicles produced in late 2022 and early 2023 may still use shared components with earlier recalled models. In such cases, some units could be included in ongoing recalls such as R23C3, particularly if dealer diagnostics confirm the presence of a defective camera system or wiring harness.
For 2023 owners, the best course of action is to proactively monitor system performance. If any issues arise — no matter how minor — a visit to the dealership is recommended. Nissan continues to cover eligible repairs under warranty or recall where applicable, and catching these failures early helps ensure compliance with FMVSS 111 safety standards while preventing potential low-speed accidents.
7. 2024 Models
For the 2024 model year, Nissan has taken steps to refine its infotainment systems and camera technologies across its core lineup, aiming to leave behind the legacy of rear visibility issues that have persisted since 2018. At the time of writing, there are no official recall campaigns issued by the National Highway Traffic Safety Administration (NHTSA) related to backup cameras on 2024 Nissan vehicles. This suggests a positive shift in hardware quality control and software reliability for the latest generation.
The 2024 Nissan Altima, Sentra, and Rogue models feature enhanced user interfaces, streamlined wiring systems, and improved image processing units — all designed to meet or exceed FMVSS No. 111 standards. Nissan has likely implemented the lessons learned from previous recall campaigns by updating suppliers, tightening production tolerances, and revising component layouts to prevent excessive wear on connectors and harnesses.
While no formal recall exists, it’s important for 2024 Nissan owners to remain observant. Initial production cycles for any new model year can sometimes carry over risks from prior years, especially if parts inventories were mixed during transitions. Should any visual abnormalities, display failures, or lagging camera behavior occur, drivers are advised to report the issue directly to Nissan or NHTSA to initiate investigation and, if necessary, future recall expansion.
By maintaining vigilance, 2024 owners can help ensure continued safety and performance. And for Nissan, keeping this model year recall-free may finally signal a resolution to a multi-year visibility issue that has affected millions of vehicles and shaken customer trust across several product lines.
Conclusion
Rear visibility may seem like a minor detail — until the moment it fails. Across model years 2018 through 2024, Nissan has grappled with a persistent challenge: ensuring that its backup camera systems function reliably and consistently. From software misconfigurations and wiring harness degradation to delayed image display and complete visual failure, the scope of issues has affected millions of drivers, triggering large-scale recall campaigns that remain ongoing for many vehicles.
As this year-by-year breakdown has shown, the most heavily affected models include the 2018–2021 Altima and Sentra, with continued sporadic issues reported in 2022 and even into 2023. While 2024 models appear recall-free so far, long-term performance remains under observation. Nissan’s response — through recall campaign R23C3 and others — includes free dealer repairs, parts replacement, and diagnostic inspections that bring vehicles back into compliance with FMVSS 111 federal safety standards.
If you own a Nissan vehicle from this range and haven’t yet checked your recall status, now is the time. A 30-second VIN lookup on Nissan’s official recall page or through the NHTSA database could prevent an accident, improve your driving safety, and ensure your vehicle remains legally compliant. Don’t wait for a blank screen to become a serious problem.
For more Nissan safety insights, recall updates, and model-specific repair guides, be sure to explore our related resources — or subscribe to stay ahead of the curve.